Features
Logic controlled, one button test, easy to setup, LED's indicate test progress. Upon failure, buzzer sounds and testing is terminated.
Output voltage, leakage current limit, Ground continuity limit, voltage ramp-up time and test duration are controlled from the rear panel.
Ground continuity test is defeatable for testing of two wire products.
Nema 5-15R receptacle provided on front panel for high voltage output. Not Available on HT-4200S
Operation instructions provided on the rear panel.
Performs UL and CSA safety agency requirements for production Hipot testing.
The HT-S series Hipot tester with adjustable voltage output, voltage ramp, test time, leakage current and ground continuity limit setting.
Can be connected to the GF-30AC-T ground bond tester for complete TUV and European safety testing, with the TESTLINK option.
Support PLC interface for complete automated testing with RI option.
Small footprint and lightweight.
Economical, durable and compact.
Calibration certificate included.
6" Drop test.
1 Year calibration cicle.
1 Year warranty.
| HT2000S Specifications |
| Voltage Range |
0-2000 AC |
| Leakage Current Set Point |
1-20 mA AC |
| Input Voltage Requirements |
117-127 V, 50 /60 Hz |
| Fuse Requirements |
120 V, 2 A Slow Blow |
| Arc Detect |
Independent High Frequency Circuit |
| Leakage Detect |
Independent Low Frequency Circuit |
| Ground Continuity Set Point |
0.08 Ω - 1.50 Ω, Defeatable |
| Ground Continuity Test Current |
100 mA |
| Test Time Range |
1 - 60 Seconds |
| Ramp Time Range |
1 - 5 Seconds |
| Voltage Meter Accuracy |
± 2 % |
| HV Shutdown by Ground Fail |
< 7 mS |
| Duty Cycle |
100% |
| Discharge Time |
< 7 mS VAC |
| Transformer Power |
< 500 VA |
| Pass/Fail Repeat-ability |
± 3 % |
| Output Connector |
NEMA plug |
| Display |
4 digits LED display |
| Test Indicator |
Led indicators |
| Failure Indicator |
Led indicators and buzzer |
| Programmable |
No |
| PLC Interface |
Optional |
| TestLink (With GF-30AC) |
Optional |
| Computer Control |
No |
| Voltage Hold on failure |
No |
| Top Mounted Handle |
Optional |
| Test Defeat Ground |
Continuity |
| Autoreset on Pass |
Optional |
| Operation Temperature |
15 - 40 °C |
| Relative Humidity Range |
0 - 90 % Non-condensing |
| Dimensions |
9.25" wide x 4.75" high x 10" deep |
| Weight |
11 Lbs |
| Calibration |
One year calibration Certificate |
| Test Cords |
Return Lead, Power Cord |
| Test Cords |
Ground Continuity Connector Tip |
| Test Cords |
J2 and J3 Optional |
| Test Cords |
Alligator Clip |