Features
1.2x50uSec Waveform up to 12kV, 12Ω MegaPulse Surge Tester
Built to the requirements of IEC 1180-1, Voltage Testers.
Generates the waveforms described in EN60335, Paragraph 14 for testing electrical separation.
Theoretical graphs and actual graphs showing the output of your tester are included with each MegaPulse, allowing easy sanity checks and proof to visiting agency engineers of test setups.
Reverse polarity waveforms available by pushing a button on the front panel. No need to change the test setup. Positive polarity indication minimizes errors.
Front panel voltage meter shows residual voltage in charging circuit for safer operation.
Ships with cables, graphs of theoretical and actual waveforms.
Calibration Certificate to ANSI Z540. A2LA Calibration Optional.
One year warranty.
| Output |
Up to 12000 Volts open circuit; controlled by front panel knob and displayed on voltage meter. Positive or negative polarity is chosen via front-panel button. Virtual Impedance: 12 ohms or 39 ohms, customer choice |
| Voltage Waveform |
1.2x50us @ 400-12kV Open Circuit: Per IEC 60060 Section 19 Peak Value: 400-12kV ± 3% (independent of meter tolerance) Front time: 1.2uSec ± 30% [Trise= 1.67 (T90%-T30%)] Duration: 50uSec ± 20% (Time to half-value) |
| Current Waveform |
12 ohm tester outputs up to 1000A (peak, short circuit) in accordance with IEC 335 4.1 |
| Charge Time |
3 seconds nominal in accordance with the fastest pulse rate in IEC 335 |
| Meter Accuracy |
± 3% 400-12kV |
| Operating Temperature |
15-40°C |
| Relative Humidity Range |
0-90% non-condensing |
| Input Power Requirements |
114-128V, 50/60Hz, 5A |
| Weight |
30 lbs. approx. Shipping weight 50 lbs. |
| Dimensions |
17 in. (W) x 6U (H) x 17 in (D) |